The types of pumps most often encountered in a refinery or chemical plant can be classified as kinetic or positive displacement pumps. Kinetic Pumps In a kinetic pump energy is added continuously to increase the fluid’s velocity within the pump to values over those in the discharge pipe. Passageways within the pump then…
Combating with corrosion is very important. So in this article, we will look at the methods that can be considered in combating corrosion. Select proper material: Keeping in view the environmental conditions and possible corrosion phenomena, water flow rate and temperature, etc. right metal should be chosen to avoid incoming problems. Moreover, the…
Corrosion may be defined as chemical degradation or metal destruction by a chemical or electro-chemical process (reaction) with its environment, which is called corrosion. Corrosion will happen when these three things combine: In water system, the principal factors affecting the corrosion of iron are: Corrosion Theory The existence of potential differences within a…
Chlorination is the process in which chlorine and its compounds such as hypo chlorides are used in water or wastewater treatment for sterilization of micro-organisms and oxidation purposes. It is used to kill pathogens or microorganisms, especially in cooling towers or clarification systems by oxidation. As an oxidant chlorine and its compound are…
Fouling of the RO membrane is more or less a normal phenomenon of most RO systems since the pretreatment of the feed water before the RO membrane is designed to reduce fouling substances as much as possible and technically could not remove all of them. Fortunately, with the correct cleaning frequency, most foulants…
Any RO System malfunction manifests itself in a loss of salt rejection, a loss of permeate flow, and an increase in differential pressure, respectively or collectively. Then It needs maintenance. If one of the three parameters or combined ones deviates slowly from the normalized value, it may indicate normal fouling and scaling which…
Maintenance of the RO plant will be done to make sure that the RO plant runs smoothly and efficiently while giving us periodic water continuously operating our whole system if your water is used in a mixed bed exchanger for further usage in the Boiler. Several types of maintenance will be done like…
Reverse osmosis (RO) is widely used in water treatment and drinking water plants to provide clear water. Reverse Osmosis (RO) is a technique in which water is passed through the semipermeable membrane by some driving force (Pressure, temperature, concentration gradient). The clear water that will pass the membrane will be called permeate or…
Activated carbon filters are very commonly used in water treatment plants to remove contaminants. They have a bed of Carbon where containments are attached by a phenomenon called adsorption. The purpose of an activated carbon filter is to remove free chlorine, an oxidizing agent that will damage most resins and reverse osmosis membranes…
Filtration is a technique in which solids or impurities are separated from the liquid by passing the liquid through filter media. The filter media has pores. These pores will allow water to pass while retaining the solid particles. The liquid that passes through filter media is called filtrate. The materials that are retained…
Empowering the next generation of engineers at all stages. We foster a thriving online community for collaboration, knowledge sharing, and career growth.
The Thriving Hub for Engineers. Join the Conversation. Shape the Future.
The Thriving Hub for Engineers. Join the Conversation. Shape the Future.
© 2024 Made by ChemXperts.com
